Equiment Details - VD BIO Medisystem

Suitable for adult, pediatric and neonatal patients
12.1'' TFT color LCD With Touch Screen
Parameters: ECG, NIBP, SpO2, Pulse Rate, Respiration, Temperature and IBP (upgradable)
Maximum 8-channel waveform synchronous display
Graphic and tabular trends for 96 hours for all formats

Multi-screen format
Powerful data management and storage capacity, 500 NIBP measurement data can be storage and recall
AC/DC, built-in rechargeable lithium battery achieves uninterrupted monitoring
Visual and Audio alarms, adjustable.
Measurement Mode: Manual/Auto/Stat

5 lead or 12 lead selectable
Input: 5 lead; RA, LT, RL, LL, V or R, L, N, F, C
Lead selection: I, II, III, aVR, aVL, aVF, Vx, CAL
Gain Selection: ×25, ×0.5, ×1, ×2, auto
Sweep speed: 12.5mm/s, 25mm/s, 50mm/s
Accuracy: ±1bpm or ±1% whichever is grater
Protection: Withstand 4000V AC/50Hz voltage in isolation against electrosurgical and defibrillation
Calibration signal: 1mV±5%
Operation modes, Diagnostic, Monitor, Surgery
Heart rate range: Adult: 15-3000bpm; Pediatric/Neonatal: 15-350bpm
Measurement range: -2.0mV to 2.0mV
ST detection: YES,
Arrhythmia analysis: YES
Alarm: YES, audible and visual alarm, alarm events recallable.

Patient Monitoring : Continuous real-time monitoring of ECG, Heart Rate (HR), SpO₂, NIBP, Respiration (RESP), Pulse Rate (PR), and Dual Temperature (TEMP). Optional IBP and EtCO₂ modules.
ECG Performance : Supports 3/5-lead ECG monitoring with real-time ST-segment analysis, arrhythmia detection, pacemaker detection, and multi-lead waveform display.
Heart Rate Range : 15–300 bpm with continuous monitoring and configurable alarm limits.
SpO₂ Performance : Measurement range: 0–100%; supports weak perfusion detection with high measurement accuracy.
NIBP Performance : Oscillometric measurement with Manual, Auto, and STAT modes; programmable measurement intervals and over-pressure protection.
Respiration Monitoring : Impedance respiration monitoring with apnea detection and alarm function.
Temperature Monitoring : Dual-channel temperature monitoring with continuous display and alarm settings.

Trend Storage : Stores trend graphs, alarm events, ECG waveforms, and NIBP records for easy review and analysis.
Alarm System : Three-level audible and visual alarms with adjustable priority and volume.
Display Performance : Simultaneous display of multiple waveforms and numeric parameters on a 12.1-inch high-resolution TFT color screen.
Network Connectivity : Supports wired LAN connection and optional central monitoring system integration.
Battery Performance : Built-in rechargeable lithium battery provides approximately 2–4 hours of operation during patient transport or power failure (configuration dependent).
Interference Protection : Resistant to defibrillator discharge and high-frequency electrosurgical interference for reliable operation in critical care environments.
Clinical Applications : Suitable for ICU, CCU, OT, Emergency Department, Recovery Room, General Ward, Ambulance, and Clinics; supports Adult, Pediatric, and Neonatal patients.

Yonker Multipara Patient Monitor YK-8000C